1. Car & Truck Body Moldings Trims Offered
  2. sku: 13627308501987603
  3. 3980807

3980807 Rocker Panel Moldings Door

fits model: Malibu, Chevelle. year: 1970-72.

3980807 General Motors 1970-72 Lot Of 7 Malibu Rocker Panel Moldings Below Door Trim Chevelle Stainless

( Brand: General Motors ), ( Manufacturer Part Number: 3980807 ), ( Part Type: Panel Molding Door Motor ), ( Vintage Part: Yes ), ( Performance Part: No ), ( Color: Silver ), ( Country Of Origin: United States ), ( Oe/oem Part Number: 3980808 )

Review GENERAL MOTORS Lot Of Rocker Panel Moldings Below Door Trim Stainless fits MALIBU CHEVELLE 1970-72

The **1970-1972 Chevrolet Malibu and Chevelle Rocker Panel Molding** (part number **3980807**) is a meticulously crafted, high-quality reproduction aftermarket molding designed to restore the classic, aggressive stance and timeless aesthetic of these iconic American muscle cars. These moldings were originally fitted to the lower body panels of the Malibu and Chevelle, providing a sleek, contoured transition between the door and the rocker panel, while also offering subtle protection against minor dings and scratches. Crafted from durable, weather-resistant **polyurethane**, these moldings are engineered to withstand the elements, resisting UV degradation, cracking, and warping over time, ensuring they maintain their sharp, factory-inspired lines for years of use. The design features a bold, slightly flared profile that enhances the car s aggressive stance, paying homage to the bold styling cues of the early 1970s. Whether installed on a restored show car, a daily driver, or a project vehicle, these moldings deliver an instant upgrade in visual appeal, bridging the gap between the door and fender with precision-engineered contours that mimic the original OEM fitment. Perfect for enthusiasts seeking to achieve that coveted "just rolled off the showroom floor" look, these moldings are a must-have for anyone aiming to preserve or enhance the classic Chevrolet silhouette of the Malibu and Chevelle era.

### **Pros and Cons of Buying 1970-72 Chevelle/Malibu Rocker Panel Moldings (Part # 3980807)**

#### **Pros:**

1. **Authentic Fit and Finish** These moldings are designed to match the original styling of your 1970-72 Chevelle or Malibu, ensuring a seamless and factory-like appearance. Aftermarket replacements may not align perfectly with the body panels, leading to gaps or misalignment.

2. **Durability and Longevity** Original or high-quality reproduction moldings are typically made from durable materials like ABS plastic or fiberglass, which resist warping, cracking, and fading better than cheaper alternatives. This helps maintain the car s aesthetic over time.

3. **Increased Resale Value** For enthusiasts and collectors, original or OEM-style parts enhance the car s authenticity, making it more desirable to buyers who prioritize historical accuracy. A well-maintained Chevelle with correct moldings can command a premium in the classic car market.

4. **Protection for Body Panels** Moldings act as a barrier between the rocker panels and road debris, reducing the risk of stone chips, scratches, and minor dents. This helps preserve the underlying paint and metal.

5. **Easier Restoration or Maintenance** If you re restoring the car or performing bodywork, having the correct moldings ensures that repairs align properly. It also makes it easier to access the rocker panels for rust treatment or touch-ups.

6. **Customization Flexibility** While these are stock moldings, they can be painted to match your car s color scheme or even customized with unique finishes (e.g., two-tone, chrome, or matte) if you re open to modifications.

7. **Reduced Risk of Aftermarket Mismatches** Cheap or poorly fitted aftermarket moldings can look out of place, especially on a classic car where attention to detail matters. Stock or reproduction parts minimize this risk.

---

#### **Cons:**

1. **Cost** Original or high-quality reproduction moldings can be expensive, especially if sourced from specialty suppliers or restored parts markets. Prices may range from $50 to over $200 per molding, depending on condition and supplier.

2. **Potential for Rust or Damage** If purchasing used moldings, there s a risk they may have rust, cracks, or warping. Inspecting them thoroughly (or buying new) is essential to avoid hidden issues.

3. **Installation Challenges** Fitting moldings correctly requires careful alignment with the rocker panels. Improper installation can lead to gaps, misalignment, or even damage to the body. Some owners may need to sand or adjust the panels slightly, which adds labor time.

4. **Limited Availability of New OEM Parts** While these moldings are relatively common, finding a single, undamaged set may be difficult. Some suppliers sell them as "sets" or require sourcing from multiple vendors.

5. **Weight Consideration** Moldings add minimal weight, but if you re focused on performance or lightweight builds, their inclusion might be seen as unnecessary. However, for most classic car owners, aesthetics outweigh this concern.

6. **Painting and Matching** If the moldings are bare or require repainting, ensuring a perfect color match to the body can be tricky, especially if the car s paint is faded or custom. Touching up the paint may require skill or professional help.

7. **Time-Consuming Restoration** If the moldings are part of a larger restoration project, replacing them may require removing other components (e.g., side markers, door handles) and could extend the timeline.

---

### **Conclusion:**

Buying **1970-72 Chevelle/Malibu rocker panel moldings (part # 3980807)** is a worthwhile investment for owners who prioritize authenticity, longevity, and resale value. The moldings enhance the car s appearance, protect the body panels, and contribute to a more complete restoration. However, the cost, potential for rust or installation challenges, and time required should be factored into the decision.

For **restoration projects or show cars**, these moldings are highly recommended. For **daily drivers or stripped-down builds**, they may be less critical, but they still add to the car s classic appeal. If budget is a concern, consider purchasing a used set from a reputable source and inspecting it thoroughly for damage before installation.

### **Recommendation:**

- **If restoring or maintaining authenticity:** Purchase **new or high-quality reproduction moldings** from a trusted supplier (e.g., Classic Parts Warehouse, GM Parts Center, or eBay sellers with verified feedback). Ensure they are free of rust and fit well before installation.

- **If on a budget:** Look for **used moldings in good condition** from forums like ChevyForum, Facebook Marketplace, or Craigslist. Inspect them closely for damage and test-fit them to the rocker panels.

- **If unsure about installation:** Consult a body shop or experienced Chevelle owner for guidance on fitting and sealing the moldings properly.

- **For customization:** If you plan to paint them, match the color to the body or consider a contrasting finish for a unique look just ensure it aligns with your car s style.

Ultimately, these moldings are a small but meaningful detail that elevates a Chevelle or Malibu s appearance, making them a strong recommendation for enthusiasts who care about historical accuracy.

Details:

This company would get 10 stars if possible. Was very impressed with communication, packing. They were safely packed, in fact so well even I had a hard time unwrapping the parts. Have never seen this before.

Original GM Muscle car parts. First off the parts were in better condition than photos. They were all removed from southern cars, some dented, are dinged, scratched, they could be used in their current condition or restored depending on your car. There are a very few select listings where there known issues.

Free shipping is to the lower 48 states only. Hard to find Mopar Parts. FAQs: Is this an original OEM part or a reproduction. It was shipped in great time.

Applications are based upon various sources, although I try to make sure research is correct it can be flawed so please verify your applications. Absolute Best. Whatever they have, I could use I m buying. When I got to it, it was surrounded with bubble wrap.I am very happy this.

If you do not see a shipping price available to you, then your home country is blocking its availability. This is smooch better than what I have. There was no way this could have been damaged or moved inside the box.The box fit it Perfectly. The way this was packaged, Iowas very impressed.

The box was actually made specifically for what I bought. Original Ford parts. It is exactly what the photos depicted. See pictures for condition and wear as we rely heavily on photos.

Hope to do business again. The instrument gauge bezel for my 1984 Bronco ll was better than advertised. Factory high performance parts. There was three layers of cardboard with heavy tape.

part #: 3980807 prices

  • $90.48-$799.67

specifications cartrimmouldings:

  • for models: Malibu, Chevelle
  • for years: 1970-72
  • brand: General Motors
  • mpn: 3980807
  • part type: Panel Molding Door Motor
  • vintage part: Yes
  • performance part: No
  • color: Silver
  • country of origin: United States
  • oe/oem part number: 3980808

returns cartrimmouldings:

  • policy: No Returns

payments cartrimmouldings:

  • other
  • wallet: Apple-pay
  • credit card: Discover

shipping cartrimmouldings:

  • type: Fixed
  • class: Standard
  • carrier: USPS
  • service: USPS Ground Advantage
  • transit: 10-14 Days
  • cost: $0.00

offer cartrimmouldings:

  • quantity: 1
  • availability: In Stock
  • options: Ship-to-home
  • started: February 24, 2026
  • sold: 0

general cartrimmouldings:

  • Car Truck Parts Accessories > Exterior Parts Accessories > Body Moldings Trims
  • condition: Used

seller cartrimmouldings:

  • city: Tulsa, Oklahoma
  • rating: 99.8%
  • # reviews: 10338
for models: malibu, chevelle, for years: 1970-72, part type: panel molding door motor, vintage part: yes, performance part: no, country of origin: united states, oe/oem part number: 3980808,
category: auto parts > car truck parts accessories > exterior parts accessories > body moldings trims, color: silver, sku: 13627308501987603,
General Motors 3980807 Is Similar To:
cartrimmouldings logo
5 offers $90.48–$799.67 USD
  • New. Offer #1 priced at $125.00 + $44.00 shipping estimate = $169.00* total. There are a few very minor shelf wear type scratches. NOS GM driver side rocker panel moulding for 70-72 Chevelle.+$44.00 shipping
  • New. Offer #2 priced at $90.48 + $164.50 shipping estimate = $254.98* total. Put your vehicle back in top shape and replace your rocker panel molding with the high quality and affordable price of OER products Driver Side Rocker Panel Molding ( ) by OER .+$164.50 shipping
  • New. Offer #3 priced at $799.67 + $0.00 shipping estimate = $799.67* total. Free shipping is to the lower 48 states only. Nice to find a beautiful pair of new old stock pair of rocker panel moldings1970 1971 & 1972 Chevelle Malibu.FREE SHIPPING
  • New. Offer #4 priced at $61.99 + $102.47 shipping estimate = $164.46* total. Includes correct hardware for proper installation. Reproduction LH rocker panel molding for 1970-72 Chevrolet Chevelle and Malibu models except SS.+$102.47 shipping
  • New other (see details). Offer #5 priced at $235.00 + $85.00 shipping estimate = $320.00* total. They are not 400.00 parts either. They are in nice shape but no mounting pieces are with them.+$85.00 shipping

Copyright © cartrimmouldings.com