NISSAN 82870JA01E Passenger Right Rear Moulding Door Strip

( Manufacturer Part Number: 82870JA01E ), ( Part Type: Door Strip ), ( Id: 8be52b29-1203-42c6-bb51-fde7b3ce8b19 ), ( Interchange: 137-cpi ), ( Side: Right )

Review NISSAN Passenger Right Rear Moulding From Door Trim Strip White fits ALTIMA QX3 2007–2012

The **Nissan 82870JA01E (07-12 Altima Passenger Right Rear Door Strip)** is a precision-engineered, high-quality trim component designed exclusively for the 2007 through 2012 Nissan Altima, specifically tailored for the passenger-side rear door. Crafted from durable, weather-resistant **polyurethane or high-density vinyl**, this door strip is engineered to provide both functional and aesthetic protection while enhancing the vehicle s overall finish. Its sleek, contoured design seamlessly integrates with the door s contours, ensuring a flush, factory-like appearance that prevents chipping, scratching, or water intrusion at the critical juncture where the door meets the body panel. The strip features a **reinforced adhesive backing**, allowing for a secure, long-lasting bond that resists peeling or detachment under normal driving conditions, including exposure to UV rays, temperature fluctuations, and minor impacts. Beyond its protective role, this trim piece adds a subtle yet refined touch to the vehicle s interior and exterior aesthetics, maintaining the Altima s polished, premium look. Whether installed during a routine maintenance refresh or as part of a full door restoration, this door strip is an essential accessory for preserving the Altima s resale value and curb appeal while offering practical defense against environmental wear.

### **Pros and Cons of buying a Nissan 82870JA01E (2007 2012 Altima Passenger Right Rear Molding/Door Strip QX3)**

1. **OEM Quality and Fit** This part is a direct replacement from Nissan, ensuring a proper fit and finish that matches the original equipment. It avoids the misalignment or poor aesthetics that can come with aftermarket alternatives.

2. **Durability** Nissan s factory parts are designed to withstand the same environmental conditions as the original, reducing the risk of premature wear or damage from UV exposure, road debris, or weathering.

3. **Aesthetic Consistency** The molding maintains the vehicle s original look, which is important for resale value and owner satisfaction, especially if the car is kept in showroom condition.

4. **Warranty Coverage** Purchasing from an authorized dealer or reputable online retailer (e.g., Nissan Parts Center, RockAuto, or Amazon) may include a warranty, offering protection against defects in materials or workmanship.

5. **Easy Installation** The part is designed to fit standard tools and procedures, making it accessible for DIYers with basic mechanical skills. No specialized equipment is typically required.

6. **Compatibility with Modifications** If the Altima has aftermarket wheels, body kits, or paint jobs, an OEM molding ensures the new part blends seamlessly without clashing with non-standard modifications.

7. **Prevents Rust and Damage** The molding protects the door edge from scratches, stone chips, and moisture, which can lead to rust over time. Replacing a damaged strip prevents further deterioration of the door panel.

---

1. **Higher Cost** OEM parts are more expensive than aftermarket alternatives. The price for this specific molding (depending on the source) can range from **$50 to $120**, which may be a significant investment if multiple moldings or other parts are needed.

2. **Limited Availability** While this part is widely available, some online retailers or local shops may not stock it, requiring additional time to source or wait for shipping.

3. **Potential for Counterfeit Parts** Buying from untrusted sellers (e.g., eBay without seller verification or unknown online marketplaces) risks receiving a low-quality or fake part that doesn t fit properly or lasts long.

4. **Installation Challenges** If the original molding was damaged or warped, removing it may require extra effort (e.g., prying, heat gun use, or adhesive removal). Rust or corrosion around the door edge could complicate the process.

5. **Overkill for Minor Damage** If the molding is only slightly scratched or chipped, a less expensive aftermarket or DIY repair (e.g., body filler and paint) might suffice instead of a full replacement.

6. **Weight and Bulk** The part is relatively heavy and rigid, which can make it cumbersome to handle alone, especially if the door is already difficult to access (e.g., due to rusted hinges or misaligned panels).

7. **Environmental Impact** Purchasing a new part contributes to waste, even if it s recycled. Some buyers may prefer refurbished or salvaged parts to reduce environmental footprint.

---

Buying the **Nissan 82870JA01E OEM passenger right rear molding/door strip** is a practical choice for owners who prioritize **quality, longevity, and aesthetic consistency**. The part is well-suited for those who want to maintain their Altima s original appearance, prevent further damage, or ensure a professional finish. However, the **higher cost and potential installation hurdles** make it less ideal for casual DIYers or those on a tight budget.

For **minor cosmetic issues**, aftermarket alternatives or targeted repairs may be more cost-effective. But if the molding is **cracked, missing, or significantly worn**, the OEM part is the best long-term solution to preserve the vehicle s integrity and resale value.

- **Buy from a trusted source** (e.g., Nissan s official parts website, RockAuto, or a reputable local auto parts store) to avoid counterfeit parts.

- **Check for compatibility** with your specific Altima model year (2007 2012) and trim level, as some variants may have slight differences.

- **Consider installation assistance** if you re unsure about removing the old molding or aligning the new one properly.

- **Pair with other protective measures**, such as ceramic coating or door edge guards, to extend the life of the molding and prevent future damage.

For most serious Altima owners, the **OEM part is worth the investment** to maintain the car s condition and curb appeal. However, weigh the cost against the severity of the damage to decide if it s the most practical solution for your needs.

Details:

This part will fit the following: NISSAN ALTIMA 07-11 Rear Right Rearward; FULL HYBRID EV-GAS FHEV. Model: NISSAN ALTIMA. Search for more parts NISSAN ALTIMA. NISSAN ALTIMA 07-12 Rear Right; Gas; SD.

part #: 82870ja01e prices

• $39.99-$57.22

specifications cartrimmouldings:

• for models: Qx3, Altima
• for makes: Nissan
• for years: 2007-2012
• mpn: 82870ja01e
• part type: Door Strip
• id: 8be52b29-1203-42c6-bb51-fde7b3ce8b19
• interchange: 137-cpi
• side: Right

seller cartrimmouldings:

• rating: 99.5%
• # reviews: 15558
• city: Brush, Colorado

shipping cartrimmouldings:

• cost: $0.00
• type: Fixed
• class: Standard
• service: Standard
• transit: 4-7 Days

returns cartrimmouldings:

• paid by: Seller
• time: 30 Days
• policy: Returns Accepted

general cartrimmouldings:

• condition: Used
• Car Truck Parts Accessories > Exterior Parts Accessories > Body Moldings Trims

payments cartrimmouldings:

• credit card: Mastercard
• other
• wallet: Paypal

offer cartrimmouldings:

• availability: In Stock
• started: April 4, 2026
• quantity: 1
• sold: 0
• options: Ship-to-home

Nissan 82870JA01E Is Similar To:

• Nissan Oem 768a46ra0a 2021 Rogue Quarter Panel Exterior Trim-finish Molding (35.1% similar) ...(October 31st, 2023)
• Oe Quality 76836-4ra0a Front Right Side Body Inch A Pillar Molding 768364ra0a For Nissan Maxima 16-20 3.5l (37.6% similar) Please look at the photos and part # to make sure its correct. Front right side body a pillar molding 768364RA0A for nissan maxima 16-20 3.5L...(November 17th, 2023)
• Oem 199.da1k18 15 Nissan Altima Rear Right Door Weatherstrip Rubber Seal Molding And Sana (40% similar) There is no holding of items unless agreed upon. First come first serve. Receipts are available upon request...(January 7th, 2024)
• Nissan 22063698 03 04 05 06 07 Murano Tail Light Bolt Trim Oem (36.7% similar) This used item comes with a 30 day warranty parts only - no labor...(January 11th, 2024)
• Nissan 808204cl0a 2014-2020 Rogue Rear Right Chrome Outside Window Molding Weatherstrip Oem (43.9% similar) ...(April 15th, 2024)
• Nissan 63814-et000 07-12 Sentra Right Fender Protector Foam (47.7% similar) 07-12 nissan sentry right fender protector foam 63814-ET000. 2007 2008 2009 2010 2011 2012...(April 16th, 2024)
• Nissan 85070-ea010 2005 2015 Xterra Rear Bumper Step Pad Trim Panel Pair Driver Side R15 (44.6% similar) Ready to ship...(May 12th, 2024)
• Nissan 781275ef0a H40809 2020-2024 Versa Rear Body C Pillar Molding Driver Side See Pics (39.1% similar) Side see pics 781275EF0A oem. Item must be packed in original package condition. H40809 2020 -2024 nissan versa rear body c pillar molding driver. Please see pictures. Big/oversized parts are shipped only to 48 USA lower states. May have light marks or scratches - wear of use. Used oem part in good...(August 3rd, 2024)
• Lexus 908166jl1a 2021-2024 Nissan Armada Liftgate Trim Piece Oem Rear Door Assembly Part (22.8% similar) Armada grille part #908166JL1A. League auto lights, condition grille face has some minor wear throughout. All mounts and back housing is intact see photos...(August 8th, 2024)
• Nissan 82870-7y900 Door Outer Molding Maxima 2004 20080 Passenger Side Rear Back Cover Trim Oem (49.2% similar) 2004 - 2008 nissan maxima right passenger rear back door trim molding oem red, details: outer side cover trim, this parts may also fit: 2004 2008...(August 9th, 2024)
• Nissan 84810-9hm2b 2013-2015 Altima Sedan Trunk Molding Chrome Used Oem Good (45.3% similar) The molding is made for durable materials and not a vintage or universal fitment item. It is an oem product with part number 84810-9HM2B and finish in chrome. This chrome trunk molding for a 2013 -2014-2015 nissan altima sedan is great addition to your car. This trunk molding is perfect for anyone ...(August 9th, 2024)